News
-
Laser cleaning technology: A new technology for industrial surface treatment
Laser cleaning is an advanced surface treatment technology that uses high-energy laser beams to instantly evaporate and peel off surface attachments (contaminants, rust, coatings, etc.). Compared with traditional mechanical, chemical and ultrasonic cleaning methods, laser cleaning has significant...Read more -
Common problems in laser welding
The welding machine does not produce laser light, but rather weak light during welding 1. Check if the laser has voltage: 220 for single-phase and 380V for three-phase. 2. Check if the laser alarm light is on. Connect the laser to a computer, open the monitoring software, and view the alarm info...Read more -
Focus on Professional Robot laser Welding System and Cutting System Solutions——Maven The 28th Beijing Essen Welding &Cutting Fair came to a successful conclusion
From June 17th to 20th, the 28th Essen Welding & Cutting Fair (hereinafter referred to as “Essen Fair”) was held at the Shanghai New International Expo Center. This exhibition focuses on the cutting-edge technologies and innovative achievements in the welding industry, attracting ...Read more -
Comparison between collaborative robots and traditional robots
Welding with collaborative robots is more efficient and safer than traditional robots or manual welding. The use of collaborative robots for welding can help manufacturing enterprises strike a balance between flexibility and safety, thereby achieving greater efficiency improvements. Industrial we...Read more -
Maven invites you to visit the 2025 South China International industry Fair
The South China International industry Fair (hereinafter referred to as SCIIF) officially opened at 9:00 a.m. on June 4, 2025. Maven, in collaboration with CGXI, jointly exhibited the laser solutions for collaborative manipulators. The exhibits this time include collaborative robot welding and c...Read more -
Research on Laser-Arc Composite Welding Technology for 10mm Medium-thick Plate T-joint Butt Welding
The shipbuilding industry is an important pillar industry of the country. In this industry, joint welding is an important project, among which T-type joints account for nearly 70%. The traditional T-type joints usually adopt arc welding, but this method has some problems that cannot be ignored, s...Read more -
The difficulties of laser welding in copper manufacturing
In the bustling landscape of modern industrial production, China has emerged as a powerhouse in manufacturing advanced laser welding solutions. Chinese laser welding machine factories play a pivotal role, supplying a wide range of high – quality equipment globally. Among the various offerin...Read more -
The relationship between welding speed and weld quality
The relationship between welding speed and weld quality should be understood dialectically and neither should be neglected. It is mainly reflected in the heating stage and the crystallization stage. 1.Heating stage Under the working conditions of high-frequency straight seam welded pipes, the e...Read more -
The main applications of lasers in industry
Since its advent in the 1960s, laser technology has rapidly developed into a key tool in the field of industrial manufacturing due to its high energy density, good directionality and controllability. Compared with traditional mechanical processing methods, laser processing has significant advanta...Read more -
LaserHybrid and LaserHotwire, two process with high joining speeds
Both laser beam welding and arc welding have long been used for industrial production, and permit a wide spectrum of uses in the field of materials-joining technology. Each of these processes has its specific areas of application, as described by the physical processes of the energy transport to ...Read more -
The Influence of Protective Gas Parameters on Laser Welding Process
Laser welding technology, due to its high energy density, low heat input and non-contact characteristics, has become one of the core processes in modern precision manufacturing. However, problems such as oxidation, porosity and element burn-off caused by the contact of the molten pool with the at...Read more -
Why do we need laser wire welding?
Compared with traditional welding methods, laser welding has significant advantages – low heat input, fast welding speed, small heat-affected zone, In recent years, laser welding has been widely used in the automotive industry, shipbuilding industry, nuclear power industry, aerospace Aviat...Read more
