Automatic Button & Lobster Clasp Making Machine: A Complete Production Line for Jewelry Hardware Manufacturers
For jewelry hardware manufacturers, the lobster clasp is one of the highest-volume components in the entire product range — and also one of the most labor-intensive to produce. Traditional workshops rely on separate punching, bending, welding, and spring-assembly stations, each handled by hand. The result is slow output, inconsistent quality, and rising labor costs. The automatic button & lobster clasp making machine line from Maven Laser Automation replaces this fragmented process with one continuous, fully automatic production line running at 30–40 pieces per minute.
What Is an Automatic Lobster Clasp Making Machine?
An automatic lobster clasp making machine is a complete production line that takes raw metal sheet or wire as input and delivers a fully assembled lobster clasp — bent, laser-welded, sprung, and finished — without manual handling between steps. The same platform also produces jewelry buttons, fish locks, and similar small hardware components in gold, silver, and other non-ferrous metals commonly used in jewelry manufacturing.
Unlike single-process equipment, this line integrates four machines into one synchronized workflow, which is why output is measured in finished pieces per minute rather than per hour.
The 4-Step Fully Automatic Production Process
The production line covers the complete clasp manufacturing cycle:
- Step 1 — Mold & Punching (2 molds): Raw material is punched into the freshly processed film sheets that form the clasp body.
- Step 2 — Bending & Welding by Laser (30–40 pcs/min): The core forming stage. A precision laser bending and welding unit shapes the sheet into the clasp grip and welds it in a single automatic pass — no manual soldering, no flame, no filler inconsistency.
- Step 3 — Automatic Spring Installation (30–40 pcs/min): The chip and spring are automatically matched and the spring is installed into the clasp body by dedicated equipment.
- Step 4 — Automatic Lobster Assembly: The final assembly equipment completes the lobster clasp, delivering the finished assembled product ready for plating or polishing.
Because every stage is automatic, one operator can supervise the entire line — a typical workshop replacing 6–10 manual assembly workers with a single machine line.
Key Specifications at a Glance
| Item | Specification |
|---|---|
| Product range | Lobster clasps, fish locks, jewelry buttons, small hardware |
| Output speed | 30–40 pcs/min (bending, welding, and assembly stages) |
| Joining method | Precision laser bending & welding |
| Process flow | Mold & punching → laser bending & welding → spring installation → final assembly |
| Operation | Fully automatic, 4 machines in one synchronized line |
| Materials | Gold, silver, brass and common jewelry non-ferrous alloys |
Why Laser Bending & Welding Beats Manual Production
Consistency. Every clasp is bent and welded by the same programmed laser path, so dimensional variation between pieces drops dramatically — critical for spring fit and long-term clasp reliability.
Speed. Manual bending and soldering averages a few pieces per minute per worker. The laser line sustains 30–40 finished pieces per minute around the clock.
Quality of the weld joint. Laser welding produces a narrow, clean, localized joint with minimal heat affect on the surrounding metal — important when working with gold and silver where discoloration means extra polishing work.
Lower labor dependence. Skilled soldering labor is increasingly difficult to hire and retain. An automatic line converts that dependency into a machine investment with predictable running cost.
See the Line Running Live at the Hong Kong International Jewellery Show 2026
Maven Laser Automation will exhibit the complete button & lobster clasp making machine line — together with its laser welding and marking equipment — at the Hong Kong International Jewellery Show 2026:
- Date: 16–20 September 2026
- Venue: Hong Kong Convention & Exhibition Centre (HKCEC)
- Booth No.: 5E323
Visitors can watch the full four-step process running on site, test samples in gold and silver, and discuss line configuration, tooling, and output planning with our engineers. Booth 5E323 — we welcome manufacturers from all regions.
Frequently Asked Questions
What output can I expect from the lobster clasp making machine?
The line runs at 30–40 pieces per minute on the bending/welding, spring installation, and final assembly stages. Actual daily output depends on material, clasp size, and changeover frequency, but a single shift typically produces tens of thousands of finished clasps.
Can the machine produce buttons and fish locks as well as lobster clasps?
Yes. The platform is designed for jewelry buttons, fish locks, lobster clasps, and similar small hardware. Tooling and molds are exchanged to switch between product types.
Does laser welding damage gold or silver clasps?
No. The laser produces a highly localized weld with a minimal heat-affected zone, which is why it is widely used for precious-metal jewelry components. The joint is clean and requires little post-weld finishing.
Where can I see the machine before buying?
Visit Maven Laser at Booth 5E323, Hong Kong Convention & Exhibition Centre, 16–20 September 2026. Live demos run throughout the show. Overseas customers can also request a factory visit or video demonstration in Shenzhen, China.
About Maven Laser Automation
Maven Laser Automation Co., Ltd. is a professional laser automation equipment manufacturer based in Shenzhen, China, specializing in laser welding, marking, and complete automation lines for the jewelry and precision metalworking industries. Our equipment is exported worldwide with CE and FDA certifications.
- Email: info@mavenlaser.com
- Web: www.mavenlazer.com
- Address: #508, Block B, Dahong, Houting, Shajing, Shenzhen, China
-
Phone
-
E-mail
-
Whatsapp
-
Wechat
Wechat
-
Top
